|
Power Phase Review Home
Review of the different
types of power phase available. Several different topics listed, all very
informative.
3 Phase Power
A common source of electrical
power transmission. This type of phase power is much more economical when
powering your equipment.
Single Phase Power
Most commonly used power for
residential and businesses that need power for lighting, heating and
cooling. This type of phase power does not supply a revolving magnetic
field.
2 Phase Power
2 Phase power is an early
20th century multiple phase that alternates the electric distribution
system. One of the advantages of 2 phase power was to start electric motors.
Three phase power has basically replaced 2 phase power.
3 Phase Power on Single Phase Power
Most residential and businesses
only offer single phase power. You can convert you single phase power to 3
phase power by using a phase converter.
Rotary Phase Converter
The rotary converter is the most widely used power converter
on the market today. The rotary converters convert your single phase
power to 3 phase power giving your equipment a smooth sine wave with little
or no maintenance for years to come.
Static Phase Converter
The static phase converter has
been around the longest in the industry but the uses on these are very
limited. They basically only jump start you three phase equipment for
a matter of seconds which can give you problems down the line.
Distribution of Three
Phase Power in the USA
Most residential and commercial areas are only supplied with
single phase power in the USA. There are some commercial areas that
have recently installed three phase power to places such as factories and
large office buildings.
Harmonic Distortion
Harmonic distortion has become
an increasing problem for machine and equipment operators. Harmonics can
reduce the life of the equipment and interrupt equipment productivity.
ACE Phase Converter
Ace Phase Converter has
solved your phase converter solutions for 25 yrs. True value with top
quality products offering a 10 warranty.
|
Rotary Phase Converter
YOUR 3 PHASE POWER RESOURCE
When reading in this section, rotary
phase converter, let's touch base on what a phase converter is in the
first place. A phase converter converts three phase power from a one
phase power source. They have been used for many years and have become
the popular alternative to provide a 3 phase power from a single phase
power source. Each converter requires the two single phase utility lines to
connect to the phase converter and the load. This basically means that
the converter and the load are parallel on the single phase line. On the
manufactured equipment phase, the third wire is the only lead coming
from the converter. The job of the phase converter is to produce
enough voltage to your equipment to make sure that is starts properly and
gives it a good running torque. It needs to create balanced currents
to each load phase so that your equipment will perform well and give you
years of longevity.
Now let's discuss what a rotary phase
converter is. The rotary phase converter was designed to power up
larger equipment and machinery and higher horse power motors. One
single rotary phase converter can supply a continuous source of three phase
power to more than one machine. Therefore, the rotary phase
converter has become the most popular choice when looking to convert
single phase power into 3 phase power. The rotary phase converter has
it's own motor to generate the third, high leg of power in which it also
passes onto the other two legs of power that is provided with your single
phase power source.
One thing to be aware of when looking
into purchasing a rotary phase converter is, not all rotary phase
converters are alike. There are a lot of companies that just convert the
single phase power into 3 phase power that is unbalanced. These type of
rotary phase converters will not give you the true 3 phase power source
that you need. Without the balanced power, your machinery and or
equipment could go on the blink for you. You need a true three phase rotary
phase converter that gong to provide a balance load and have other power
factor correction to control harmonic distortion and other problems. So always make sure that the
manufacturer is providing you with a true 3 phase rotary phase converter.
This will assure you that your equipment will run much more smoothly and be more cost effective for you and will also provide you with many years
of service with little or no maintenance needed for at least a good 35
years.
Selecting a rotary phase converter manufacturer
can always be a headache cause there are so many on the market today but we
have a suggestion for you if you want to purchase the best there is.
ACE Phase Converter guarantees that you are getting what you are paying for
when selecting a rotary phase converter. Their professional
engineering staff can help you find exactly what you are looking for with
the rotary phase converter. They will help you
determine what your application requirements are
and then determine the perfect true 3 phase rotary phase converter
for your equipment. They will guarantee that their rotary phase
converters will operate safely, efficiently and give you that cost
effectiveness that you so want for years and years.
ACE
Phase
Converter, has been in the
industry now for over 25 years providing good quality products. They
have all of the phase power solutions for all of your equipment and
machinery. They are so proud of their rotary phase converters
and all of their other power source equipment that they will give you a 10
year warranty on all their products.
Hope that this section about rotary
phase converters has been helpful to you so you now know what you may
need to power all your equipment to give you years of quality service.
Bookmark this site:
Power Phase
|
Power Phase
and Related Resources:
Three Phase
Power
Learn about three phase
power and what it does for your equipment and machinery.
3 Phase Power
Solution
Find a quality 3 phase power
manufacture when looking for your 3 phase power solutions. Learn about which
phase converter you will need to power your equipment or machinery.
Rotary
Phase Converter
The rotary phase converter has
become the most widely used phase converter when trying to get a true three
phase power to your equipment.
CNC
Phase Converters
Learn what a CNC phase
converter is and what type of equipment uses it. CNC stands for Computer
Numerical Control and it has been around for over 40 years.
Static
Phase Converters
Informative information on
static phase converters as to what they do and what they don't do for your
three phase equipment needs.
Phase Converter Comparison
Evaluate all
different phase converters as to what each one does for your power needs to your
equipment. A look at static, rotary, CNC, digital and inverters are all laid out
for you to choose from.
Additional Resources
Three Phase Diesel Generators
Learn all about the
different phase diesel generators and what type to purchase. Choose a good
quality manufacturer from the list provided.
Three Phase Transformers
Learn the different
varieties of three phase transformers and voltages on the market today and
find what you need for your equipment or machinery.
Three Phase Isolation Transformers
Find a wide range of high
quality 3 phase isolation transformers. A good selection of manufacturers is
found here on this site.
Rotary Phase Converter MD
Good reading material in
finding your three phase electrical solutions for your equipment. All
aspects are discussed thoroughly.
3 Phase
Converters
Find all the different
types and details of all the different 3 phase converters on the market
today to power your 3 phase equipment.
|
